UPS 15-20 kVA

UPS Topology Tip On-line double conversion according CEI EN 62040-3 VFI-SS-111
> 150%, 200ms For installation on IT Rack
UPS output power 11-15-20 kVA (SW upgradable)
Nominal input voltage 380V/400V/415V
Input voltage range without battery discharge depending on load % 173-498 V
Nominal input frequency 50/60 Hz
Input frequency range 40-70 Hz
Input power factor at full load (kw/kva) 0,99
THD at full linear load (THDI%) ≤3 %
Nominal output voltage 380/400/415 or 220/230/240 V selectable at installation
Inverter overload capacity at 25°C 105% for 60 min; 125% 5min; 150% for 1 min, > 150%, 200ms
Double conversion efficiency 96,20%
ECO Mode Efficiency 99%
By-pass voltage tolerance -50
By-pass frequency tolerance +/-10%
Battery blocks per string 24-40
Battery charger min. current 12 A
Parallel connection of UPS Up to 4 units
Noise at 1 m (dBA) ≤59 dBa
Ventilation Face to back
Protection IEC (60529) IP20
1.2 UPS configuration:
UPS back-up time at 100% load 12 KW and PF =1 8 min.
Battery type/service life AGM/10 years
Battery voltage temperature compensation kit Included
Room temperature and relative humidity sensor Included
Ethernet interface for monitoring Protocol SNMP
Sliding kit for UPS and battery YES
By-pass Electronic and Manual
Input POD Protection CB/Input/ Output/ Battery, By-pass switch
Load power distribution YES
Rack/Tower design delivered with rack mount: UPS/ input POD/ Load distribution dimension/Battery sets accessories 3U/3U/3U/6U(4U)
General standards EN/IEC/AS 62040-1, EN/IEC/AS 62040-2, CEI EN 62040-3 VFI-SS-111